Image 1 of 1
Image 1 of 1
Image 1 of 1
Image 1 of 1
Sealers Cove is a grey and soft green satin matte glaze with tan breaks on the rims and edges or where it�€™s thinner. The higher in firing, around 1250 degrees this glaze develops with green and grey crystals appearing.�
Food Safe - No Lead frit is used in the manufacture of this product.
Keep lid tightly closed during storage and if thickening occurs add a small amount of water.
Application of Brushing Glaze
Once the container of liquid glaze has been shaken and stirred, load your glaze brush by immersing the hair up to the ferrule. Remove the glaze from one side of the brush and apply the fully loaded side to the bisque. As an approximate guide, a fully loaded brush will go about 80 mm before it should be re-loaded. Apply one even coat, let the "wet" look disappear, then apply a second coat in the opposite direction. When the second coat has lost its "wet" look, apply a third coat in the same direction as the first.
Sealers Cove is a grey and soft green satin matte glaze with tan breaks on the rims and edges or where it�€™s thinner. The higher in firing, around 1250 degrees this glaze develops with green and grey crystals appearing.�
Food Safe - No Lead frit is used in the manufacture of this product.
Keep lid tightly closed during storage and if thickening occurs add a small amount of water.
Application of Brushing Glaze
Once the container of liquid glaze has been shaken and stirred, load your glaze brush by immersing the hair up to the ferrule. Remove the glaze from one side of the brush and apply the fully loaded side to the bisque. As an approximate guide, a fully loaded brush will go about 80 mm before it should be re-loaded. Apply one even coat, let the "wet" look disappear, then apply a second coat in the opposite direction. When the second coat has lost its "wet" look, apply a third coat in the same direction as the first.